CYCLUS TOOLS saw blade for carbon.This special hacksaw blade is specifically for cutting carbon fibre parts (i.e. carbon steerer tubes, handlebars or seat posts). To be used with hacksaw art. no.: 720302.Note! When cutting steel or aluminum steerer tubes, handlebars or seat posts, use the regular hacksaw blade - Art. no.: 720304.When shortening bike parts, always recommend use a suitable guide (e.g. fork steerer cutter Art.-No.: 720052) to obtain a straight and clean cut, then carefully deburr the cut with a file e.g. Art.-No.: 720540.
CYCLUS TOOLS Stem Clamp.The use of the Cyclus Tools steerer clamp guarantees an exact angular cut when shortening the stem.Fasten the clamp in a vice and set the desired diameter.Determine the installation height of the headset used.Note the measurement on the clamp when clamping and cutting the stem to length.Please note that the stem clamp is not suitable for the carbon saw blade code: 720303. neccessary for 1" & 1 1/8" steer tube incl. Bushing insert
CYCLUS TOOLS single die 1 "- for 1" fork tube thread Cutting die for cutting or re-cutting fork tube threads for 1" fork assembly. Diameter: 1"It includes: die without die stock. So you need a die stock for a complete tool set! e.g. Cyclus Tools art. 720070, 720077.
CYCLUS TOOLS Handle for holiding fork tube cutter die.For cutting new threads during fork assembly.Includes: fork tube cutting handle (die clamp) - die cutter not included.Note: For a complete tool, the matching die (e.g. Art.No.: 720019; 720020) is also required.
CYCLUS TOOLS® tube cutter, including spare circular cutter blade.Makes light work of cleanly cutting circular metal seat posts, handlebards and other pipes/tubes. It is not necessary to clamp the part to be cut in a vice, cutting is achieved by rotating of the tool around the tube and gradually turning the black knob to press the cutting wheel inwards. Cutting normally only requires a few turns. Burrs are removed from the cut using with the integrated Noga countersink blade.- for tubes diameter 3-35 mm- cutting wheel for alloy and steel tubes- 4 guiding rolls, made of stainless steel- magnesium cast, therefore very light weight and solid- steel spring spindle- cutting wheel can be changed quickly, without tools- spare cutting wheel included in the turn knob- Noga countersink blade
