All-purpose use chain tensioner to mount on the derailleur hanger. Convert any vertical dropout frame with derailleur hanger to a single speed bike.Spring loaded arm keeps tension on chain and this chain retention hoop prevents chain derailment.Pulley axle ist adjustable to optimize chainline.Material: alloyColor: black
The CYCLUS TOOLS adjustable pin spanner, plastic handle.This pin spanner is used to mount and unmount freewheels, bottom brackets and cassettes.The 2.3 and 2.8 mm pins are interchangeable, meaning that the distance between them can be adjusted to suit the different requirements.Made from hardened and tempered steel, with double dipped plastic handles for improved grip.The greatest difference achievable between pins is 50mm open and 10mm closed.The changeable pins are available as spare parts with article: 720937.
The CYCLUS TOOLS transparent assembly compound is made of a special abrasive particle mixture for secure assembling of high end carbon, aluminum and steel components, such as seat posts, pedals and handlebar stems. The higher friction drops clamping force by 30% and minimizes risk of damage. The composition used minimizes scratches and it prevents the components from twisting or loosening. Furthermore, it perfectly protects the contact surfaces against corrosion.
CYCLUS TOOLS CHAIN LINK COUNTER.When the time has come to change the old chain, you need to determine the number of chain links for the new chain. The length of the worn bicycle chain will be considerably extended during its lifetime, so new and old chain of the same length will have a different number of chain links. It is not sufficient to just measure the length of the chain, much better is to replace with exactly the same number of chain links. compatible with bicycle chain width from BMX (single speed) up to 12-speed incl. paintstick to mark the chain linkhow it works:1. put the chain link counter on the chain and set zero2. mark chain link next to the counter3. rotate the chain one full round, ending with the marked chain link on the same spot4. read the number of chain links5. use chain link counter to measure the new chain(new chain with the same number of links will be shorter than the old worn one)
CYCLUS TOOLS Chainring 'r complete set including 5 Bits (A,B,C,D,E).The CYCLUS TOOLS Chainring'r mounting pliers allow safe work on chainring and rear dropout bolts.Ensure exact form fit between bit & chainring bolts and use only a suitable bit during assembly.The following "Bits" (A to E) are included in this set:Bit "A" (720322) constant 1.0 mm notch, separate part for chain ring bolt assembly pliers (code: 720327).For Campagnolo carbon cranks (Chorus / Record / Super Record).Bit "B" (720323) notch, 2.0 mm, separate part for chain ring bolt assembly pliers (code: 720327).For Miche cranks (Team / Pista / Evo / Young).Bit "C" (720324) hexagon 5 mm, separate part for chain ring bolt assembly pliers (code: 720327).For SRAM/Truvativ cranks (XX / X0/ X9 / X7 / X5 / S1400 / S1000) and FSA (K-Force Light / SL-K / Gossamer / Afterburner).Bit "D" (720325) 2-notch 1.5mm, separate part for chain ring bolt assembly pliers (code: 720327).For Shimano cranks (Dura Ace / Ultegra / 105 / XTR / XT / LX / Deore).Bit "E" (720326) 2-notch 1mm, separate part for chain ring bolt assembly pliers (code: 720327).For Campagnolo square taper, Campagnolo Pista, SRAM X-Four, Shimano Dura Ace Pista cranks.