CYCLUS TOOLS crown race fitting tool 1" 1 1/8"
Product number:
720012
Manufacturer:
Cyclus Tools
Manufacturernumber:
720012
EAN:
8590831240284
CYCLUS TOOLS crown race fitting tool 1" 1 1/8"
₹4,235.00*
Product information "CYCLUS TOOLS crown race fitting tool 1" 1 1/8""
The Cyclus Tools crown race installer enables you to install a crown race ring onto a 1" and 1 1/8" fork steerer tube.
The installer must be carefully placed on top of the steerer tube in order for the crown race to be introduced nice and straight onto the fork. This will ensure correct seating of the lower headset bearing and perfect turning of the fork in the frame.
Note:
1. make sure the crown race is seated straight, not inclined;
2. Check before installation that the crown race matches head tube inner diameter. If not, use the Cyclus Tools art. 720003 / art. 720004 / art. 720034 for milling the crown race seat of the fork .
The installer must be carefully placed on top of the steerer tube in order for the crown race to be introduced nice and straight onto the fork. This will ensure correct seating of the lower headset bearing and perfect turning of the fork in the frame.
Note:
1. make sure the crown race is seated straight, not inclined;
2. Check before installation that the crown race matches head tube inner diameter. If not, use the Cyclus Tools art. 720003 / art. 720004 / art. 720034 for milling the crown race seat of the fork .
Cyclus Tools
Cyclus TOOLS – clever ideas for you`r bike-workshop
Cyclus Tools® develops and produces tools for professional bicycle garages, but of course it’s also appropriated for hobby technicians. Produced in Europe, these tools are permanently proofed by our quality checks. With furnitures for your garage or cosmetic care products the portfolio is rounded off very well. For every problem Cyclus Tools® offers solutions. Cyclus Tools® counts among the leading manufacturers of tools for bicycles. To stay at the top we continuously enhance our products for today’s fast changing conditions.
Login