Filter
CYCLUS TOOLS digital micrometer | 0 - 25 mm. 0.001 mm
 CYCLUS TOOLS digital micrometer spoke measuring guage.Measures from 0 - 25 mmAccurate to 0,001 mm (1/1000 of a mm)An external micrometer is an instrument for very accurate measurement (to 0.001 mm) in the micro-millimeter range.This gauge is designed for accurately measuring spoke thickness, so is the best means for measuring the outside spoke thread diameter in order to achieve the best results with the thread rolling machine Gen. 4 Art.No: 720365.

₹7,850.00*
CYCLUS TOOLS hanging scale digital
CYCLUS TOOLS hanging scaleWell equipped digital hanging scale with high precision sensor and high capability to ensure weighing accuracy.    capacity: (min/max): 20g - 50kg, (accuracy: a tolerance of 5g allowed from 20g to 10kg, a tolerance from 10g allowed from 10kg to 50kg),    tare function, useful when adding the weight of components to a bicycle being weighed.    power saving, auto off after 120 sec,    required batteries: AAA (not included),    rubber coated hanger for conveniently holding and weighing bicycles.

₹3,890.00*
CYCLUS TOOLS magnetic collector for small parts, stainless steel, round
CYCLUS TOOLS magnetic parts dish. 15cm diameter.Handy stainless steel collector dish for keeping small parts while you work.Magnetic base, so will stay in place on most metal work stands and keep most commonly used bike part components secure while you work on a bicycle.

₹1,490.00*
CYCLUS TOOLS SPOKE RULER, METAL
CYCLUS TOOLS spoke measuring ruler? exact determination of spoke lengths in milimeters / inches (Spiechenlange)? bore from 1/8" to 1/4" for measuring length of spokes of different ball sizes? gauge for determination of spoke diameters (Speichendurchmesser)? Additional function: holes for measurement of spoke ball sizes (Kugelmass)

₹1,900.00*
CYCLUS TOOLS tabletop scale digital (w/o battery)
CYCLUS TOOLS tabletop scaleWell equipped digital scale with high precision sensor and high capability to ensure weighing accuracy.    capacity (min/max): 1g - 3000g    tare function    power saving, auto power off    required batteries CR2032 (not included)

₹2,290.00*
CYCLUS TOOLS WHEEL DISHING TOOL 24"" - 29""
CYCLUS TOOLS wheel dishing tool 24" - 29".Use this gauge to center (Dish) wheels.Unscrew the set screw until both measuring surfaces of the gauge rest on the rim flank, then turn in the set screw until the measuring surfaces lift slightly off the rim flank.Next place the gauge on the opposite side of the wheel.You can now easily see the axial symmetry of the wheel and adjust the spoke tension on the appropriate side of the wheel to centre the rim if necessary.

₹9,595.00*
CYCLUS TOOLS WORKSHOP WHEEL TRUING STAND, FOR WHEEL SIZE UP TO 29"
CYCLUS TOOLS workshop wheel truing stand, for wheel size from 24" up to 29".Professional wheel truing can only be carried out when existing rim side to side deviation, high points and side wall imperfections (dents and flat spots) can be identified.The Cyclus Tools truing stand quickly and easily enables you to do this.1) Clamp the wheel in the stand with the adjustable width arm holders.2) Screw the caliper tips in/out to the start position directly besides or under the wheel rim.3) Rotate the wheel to check lateral and radial deviation.optional accessories:    exchange kit for fat bike wheels, incl spring and calipers (art. 720081)    plastic protection cap for caliper tips (art. 720945)

₹34,000.00*
Hozan, BICYCLE TOOL HOZAN ACRYLIC LEVEL GAUGE
A measuring tool to check horizontalness when fitting the saddle or handle bars in proper.Horizontalness in a wide face can be seen using with a ruler and such.

₹2,495.00*